How to Store and Protect Outdoor Furniture for Winter — The Right Way
Share
Most outdoor furniture does not get damaged during the months it is being used. It gets damaged during the months it sits in storage — trapped under an improperly sealed cover, left with debris against the frame, or stored wet and forgotten until spring.
The good news is that winterizing outdoor furniture correctly takes a few hours, once, and the payoff is furniture that comes out in spring looking almost exactly the way it went in.
Here is how to do it right, by material.
The universal first step: clean before you cover
No matter what you are storing or where, start with a thorough cleaning. Do not skip this step, and do not do it the same day you cover everything.
Organic material left on outdoor furniture — pollen, leaf debris, bird droppings, mildew — becomes a much bigger problem under a cover or in storage. Humidity concentrates, biological growth accelerates, and what was a light surface stain in October becomes a deep discoloration by March.
Clean the furniture, rinse it thoroughly, and give it 24 to 48 hours to dry completely in the sun before covering or moving to storage. Any moisture trapped under a cover or inside a garage creates exactly the conditions that damage finishes and fabrics.
Storing teak
Teak is the most forgiving material to store. It can stay outdoors in most climates — covered with a breathable furniture cover — and emerge in spring without significant damage.
A few specifics:
Use a breathable cover, not a waterproof tarp. Waterproof tarps trap humidity inside and create a greenhouse effect that accelerates mildew on the wood surface and any cushions stored beneath. Furniture covers made from breathable fabric — most quality outdoor furniture covers are — allow moisture to escape while blocking precipitation.
Do not store teak in sealed plastic. Same principle. Teak needs to breathe.
In climates with heavy sustained freezing or repeated freeze-thaw cycles, moving teak to a garage or covered storage protects the hardware — bolts, connectors, and any stainless or galvanized metal components — from accelerated corrosion. The teak itself handles the cold fine. The hardware appreciates the protection.
Loosen any adjustable slats or folding mechanisms slightly before storage. When wood freezes and contracts, tight-fitting hardware can stress the joints. A small gap prevents this.
Our full guide to teak outdoor furniture care covers everything from seasonal maintenance to cleaning methods if you want to go deeper on this material.
Storing aluminum
Powder-coated aluminum is one of the easiest materials to store. It does not rust, does not warp, and is largely indifferent to temperature changes.
The main things to protect:
Cushions. Remove them from aluminum frames before storage. Store cushions indoors in a dry location, or in a storage bag that breathes. Never store cushions compressed or stacked in a sealed container — compressed foam loses its shape over time, and sealed storage concentrates moisture.
Cover or bring indoors in harsh climates. Powder coating is durable, but sustained freezing with road salt in the air (common in northern climates near roads or highways) can eventually compromise a finish. A cover handles this.
Stack chairs before covering. Most aluminum chairs are stackable. Stacking them reduces the cover footprint, protects more chairs under one cover, and keeps them from shifting or falling over in winter wind.
Storing all-weather wicker
All-weather wicker — properly called resin wicker — is UV-resistant and water-resistant, but it benefits from protection during extended storage.
Bring it in or cover it. While the wicker itself handles cold, the woven structure can collect debris and retain moisture if left uncovered through a wet winter. A breathable cover prevents this.
Check the weave annually. Before storing, look for any loose or cracked wicker strands, particularly at the corners and edges of seat cushions where flexing is most frequent. A small crack caught in October is easy to address. A small crack left through winter often becomes a larger failure by spring.
Store cushions separately. Same principle as aluminum — dry, breathable, uncompressed.
What to do about covered patios
A covered patio — a pergola, a lanai, or a roofed outdoor structure — changes the storage equation. Furniture on a fully covered patio with no significant wind exposure can often stay in place year-round with a quality cover, regardless of climate.
If your patio is only partially covered, treat the exposed furniture the same as open-patio furniture and the covered furniture with the relaxed approach of a protected space.
We covered the full picture of what works on covered patios here — including which materials age best in that environment.
The spring payoff
Furniture stored correctly — cleaned, dried, covered with breathable material, hardware checked — comes out of winter ready to use. Furniture stored carelessly comes out needing cleaning, treatment, and sometimes replacement of hardware or cushions.
The difference in time between the right approach and the careless one is about two hours in the fall. The difference in outcome is years of additional life on a furniture set that cost hundreds or thousands of dollars.
In March, when you are ready to bring everything back out, a patio refresh takes about half as long when everything was stored properly. Our guide to spring patio refresh covers that side of the seasonal cycle — what to inspect, what to replace, and how to get the space ready for another season.
Gold Star Dining ships free to all 48 contiguous states. Questions about a set you are considering and how it handles winter in your climate? Call us at (708) 260-6078, Monday through Friday, 9AM to 6PM CST.